Scale it Up, Scale it Down

As your Easylite ILS grows, so do your potential energy savings.

Adjust your Daylight Harvester using a flashlight, not a ladder.

Start simple. Enjoy a lower installed ILS cost.  Easylite ballasts power the Easylite ILS using safe, low voltage, plug and play, plenum rated cable.

Wire fixtures. Connect Easylite ballasts to line voltage power and Easylite’s low voltage ballast generated control power system takes over, offering a safe and simple way to connect Easylite ILS ballasts, controls, and sensors.

Add switches. One Easylite ballast can provide low voltage power to an Easylite Decora style dimmer switch.  Now you enjoy 100% to 10% dimming, and low voltage on/off switching control for one to hundreds of lamps.

Add sunlight sensing. That same fixture can power a Daylite Harvester. Placed strategically in sunlit spaces, the Daylite Harvester cuts ballast energy use as it responds to available ambient light. Use one Daylight Harvester to control one fixture, a single 100 fixture zone, or multiple 100 fixture zones.

Add occupancy sensing. Add an Easylite occupancy sensor and the Easylite ballast powers it up too. Occupancy sensing makes sense: you pay for the light you need, not the light you don’t. Easylite occupancy sensors are built with Office buildings, Warehouses, Health Care and Educational facilities in mind. Easylite helps these types of facilities reduce their energy use, and cut annual lighting bills by up to 70%.

Add timers or building management systems. The Easylite ILS interfaces with timers and existing Building Management Systems using our low voltage analog control loop. Plug Easylite ILS into an existing Building Management System, and now you can schedule and control lighting zones in real time. Now you can shed lighting energy loads manually or automatically.

Add an Easylite ILS and scale up your savings. The more lamps you dim, the more energy you save.  As your Easylite ILS grows, so do your potential energy savings. Easylite ballast provided low voltage power offers plug and play system scalability, using safe, plenum rated low voltage cable to connect fixtures, sensors and controls. Easylite’s ballast provided low voltage power is used to turn on, dim, and turn off lamps, to create and control lighting zones, add user overrides, connect with timers, interface with existing Building Management Systems, and employ multiple lighting control strategies. Easylite ILS makes all of this happen, simply, with ballast provided low voltage power, and a lot less high voltage hassle. 

Learn More > Contact Us >