T5-HO Parallel Dimming Ballast - 40 Watt & 55 Watt Biax
Low Profile T5-HO – 40 Watt Biax -Two, Three and Four Lamp / 55 Watt Biax - One to Four Lamp
The foundation of any Easylite Integrated Lighting System (ILS), Easylite dimming ballasts adjust light levels using low-voltage controlled frequency modulation. Ballasts connect to the rest of the Easylite ILS with class 2 plenum rated wiring, using RJ-11 terminations for quick and easy installation.
With Easylite T5-HO Biax dimming ballasts you have the power to create a customized lighting environment that enhances employee productivity, reduces maintenance costs and integrates with any DEMAND RESPONSE protocol.
Advantages
Low-voltage ballast power supply. The Easylite ballast supplies a constant 17 Volt DC along our low-voltage control line. This separate power supply drives all the peripheral controls in our system, and it allows the configuring of control zones of unlimited size.
Parallel Wired. Separate transformers for each lamp mean good lamps stay lit when others are burned out.
Program Start. Our proprietary lamp ignition sequence and operating characteristics increase lamp life.
100% to 15% dimming range, with low voltage shutoff. Easylite T5-HO Biax ballasts provide a continuous dimming range of 100% to 15% of light output and can also shut off power to the lamps via the low voltage control, eliminating costly line voltage relays and connections.
Run cool. Easylite ballasts are the coolest operating and most efficient electronic frequency modulated dimming ballasts that provide low voltage power for connected peripheral controls.
Power multiple lamps with one ballast The low-profile T5-HO Biax model offers the option of two through four lamp configurations for 40 Watt Biax models and one through four lamp configurations for 55 Watt Biax models.
Specifications
Five-Year Warranty
Plug and play, ballast power and control
AC Voltage 3 & 4 lamp: 100 to 300
AC Frequency: 50-60
Power Factor (min.): .98
Ballast Factor: 1.0
Crest Factor: 1.53
Inrush Current: 2.4 Amps
Sound Rating: Class A
Frequency of Operation: >20 KHz
THD (277V AC): <10%
Minimum Starting Temp: 32˚ F
Line Transient Protection
ANSI C62.41 Surge Protection Standards
U.L. and U.L.C. Listed
Meets FCC part 18 Class A
FCC CFR 47 for RFI/EMI
Dimensions:
23” x 1.18”(h) x 1.45”(w)
0-10V Inverter Module
0-10VDC Inverter Module
Allows the Easylite dimming protocol (reverse acting 0-10 volt) to operate standard 0-10 volt ballasts. For fixtures or dimming of lamp types not currently in the Easylite ballast family, the Easylite Inverter Module is a quick and simple solution to integrate these fixtures into the Easylite ILS control loop.
With an Inverter module installed between the Easylite ILS control loop and industry standard 0-10VDC dimming ballasts, your Easylite ILS controls will proportionally dim connected fixtures throughout the dimming range 100%– 10%. This module plugs into the Easylite control cabling connection between the last Easylite ILS control (e.g. Daylite Harvester, Link-Easy, Dimmer Switch, Occupancy Sensor, PSR) and the two conductor control loop connecting industry standard 0-10VDC dimming ballasts.
Note: On/Off control of industry standard 0-10VDC dimming ballasts requires the use of an Easylite PSR & RIB.
Advantages
Simple installation on dedicated fixtures
A single module can control multiple fixtures
Specifications
Five-Year Warranty
Plug and Play, Ballast power and control
300V insulation
24 AWG four-wire cable and
18 AWG stranded wire
Plenum Rated
Factory terminated with RJ-11 connector
Dimensions
3’ cable length
Voltage
0-10 Volt DC
T5 Parallel Dimming Ballast - 28 Watt
Low Profile for T5 – 28 Watt/Two, Three, and Four Lamp
The foundation of any Easylite Integrated Lighting System (ILS), Easylite dimming ballasts adjust light levels using low-voltage controlled frequency modulation. Ballasts connect to the rest of the Easylite ILS with class 2 plenum rated wiring, using RJ-11 terminations for quick and easy installation.
With Easylite T5 dimming ballasts you have the power to create a customized lighting environment that enhances employee productivity, reduces maintenance costs and integrates with any DEMAND RESPONSE protocol.
Advantages
Low-voltage ballast power supply. The Easylite ballast supplies a constant 17 Volt DC along our low-voltage control line. This separate power supply drives all the peripheral controls in our system, and it allows the configuring of control zones of unlimited size.
Parallel Wired. Separate transformers for each lamp mean good lamps stay lit when others are burned out.
Program Start. Our proprietary lamp ignition sequence and operating characteristics increase lamp life.
100% to 20% dimming range, with low voltage shutoff. T5 Easylite ballasts provide a continuous dimming range of 100% to 20% of normal light output and can also shut off power to the lamps via the low voltage control, eliminating costly line voltage relays and connections.
Run cool. Easylite ballasts are the coolest operating and most efficient dimming ballasts available.
Power up to 2,3 and 4 lamps. The low-profile T5 model offers the option of two, three, and four lamp configurations.
Specifications
Five-Year Warranty
Plug and play, ballast power and control
AC Voltage 2, 3 & 4 lamp: 100 to 300
AC Frequency: 50-60
Power Factor (min.): .98
Ballast Factor: 1.0
Crest Factor: < 1.53
Inrush Current: 2.4 Amps
Sound Rating: Class A
Frequency of Operation: >20 KHz
THD (277V AC): <10%
Minimum Starting Temp.: 32˚ F
Line Transient Protection
ANSI C62.41 Surge Protection Standards
U.L. and U.L.C. Listed
Meets FCC part 18 Class A
FCC CFR 47 for RFI/EMI
Dimensions:
23” x 1.18”(h) x 1.45”(w)
T8 Parallel Dimming Ballast - 17 Watt
Low Profile T8 – 17 Watt / Two, Three and Four Lamp
The foundation of any Easylite Integrated Lighting System (ILS), Easylite dimming ballasts adjust light levels using low-voltage controlled frequency modulation. Ballasts connect to the rest of the Easylite ILS with class 2 plenum rated wiring, using RJ-11 terminations for quick and easy installation.
With Easylite T8 dimming ballasts you have the power to create a customized lighting environment that enhances employee productivity, reduces maintenance costs and integrates with any DEMAND RESPONSE protocol.
Advantages
Low-voltage ballast power supply. The Easylite ballast supplies a constant 17 Volt DC along our low-voltage control line. This separate power supply drives all the peripheral controls in our system, and it allows the configuring of control zones of unlimited size.
Parallel Wired. Separate transformers for each lamp mean good lamps stay lit when others are burned out.
Program Start. Our proprietary lamp ignition sequence and operating characteristics increase lamp life.
100% to 20% dimming range, with low voltage shutoff. Easylite T8 17 watt ballasts provide a continuous dimming range of 100% to 20% of light output and can also shut off power to the lamps via the low voltage control, eliminating costly line voltage relays and connections.
Run cool. Easylite ballasts are the coolest operating and most efficient electronic frequency modulated dimming ballasts that provide low voltage power for connected peripheral controls.
Power 2, 3 and 4 lamp. The low-profile T8 – 17 Watt model offers the option of two, three, and four lamp configurations.
Specifications
Five-Year Warranty
Plug and play, ballast power and control
AC Voltage 3 & 4 lamp: 100 to 300
AC Frequency: 50-60
Power Factor (min.): .98
Ballast Factor: 1.0
Crest Factor: 1.53
Inrush Current: 2.4 Amps
Sound Rating: Class A
Frequency of Operation: >20 KHz
THD (277V AC): <10%
Minimum Starting Temp: 32˚ F
Line Transient Protection
ANSI C62.41 Surge Protection Standards
U.L. and U.L.C. Listed
Meets FCC part 18 Class A
FCC CFR 47 for RFI/EMI
Dimensions:
23” x 1.18”(h) x 1.45”(w)
High Bay Open Area Fixture
Termination Hub
High Bay Fixture with Aisle Occupancy Sensor
Occupancy Sensor Hub
8’ Linear Fixture
2’x4’ Recessed Fixture
2’x2’ Recessed Fixture
RJ-11 Coupler
Egress/Night Light Module
Egress/Night Light Module
Allows proportional dimming between 100% and 10% brightness, prevents off signal to dedicated egress fixtures. Facilities that require light fixtures run all day and all night can save energy with Easylite’s Egress fixture module. Most egress fixtures run at 100% output day and night, but when you connect the Egress fixture module to dedicated egress fixtures, they respond to the Easylite ILS proportional dimming control signal, instead of always being on at full bright.
At night, the Egress fixture controller prevents an off signal from being passed to the connected fixture, and instead takes the fixture to full dim (10% light output).
Advantages
Simple installation on dedicated fixtures.
Plug an Egress Module (night light) into the Easylite ILS control loop and the Easylite Ballast, and your Easylite ILS detects an off signal and causes the connected fixture to default to full dim output while the input control is off.
Energy savings through off hour dimming.
With an Easylite Egress Module, your dedicated egress fixtures track the Easylite ILS control signal input during scheduled operating hours, and during scheduled off hours, the fixture goes to full dim, cutting power use by 75%.
Specifications
Five-Year Warranty
Plug and Play, Ballast power and control
300V insulation
24 AWG four-wire cable
Plenum Rated
Factory terminated with RJ-11 connectors
Dimensions 3’ cable length
Voltage 0-10 Volt DC
Link-Easy
Subzoning Module
The Link-Easy is an electronic control module that allows the user to modify an existing Easylite ILS dimming zone. With a Link-Easy you can isolate a sub-zone in a larger zone that may require local control such as dimmers, occupancy sensors, or Daylite Harvesters. The Link-Easy also allows the application of multiple controls to a zone or sub-zone. The Link-Easy simply compares two control inputs, and then sends the dimmest signal to the fixtures.
Need lighting for off-hour employees and maintenance staff without operating the entire lighting zone? The Link-Easy module can provide override of the present setting for a pre-set time period, enabling full control of the lighting zone. Configure and reconfigure, the Link-Easy offers easy modification of a lighting zone after construction for sub-zoning or additional control features.
Advantages
Unlimited flexibility to sub-zone fixtures anywhere within the three-wire analog control circuit connecting Easylite ballasts.
Quick, low-cost modifications and options can be implemented using low-voltage ‘plug-and-play’ wiring and components.
No power wiring is necessary to effect major or minor system sub-zoning.
Override capability. The Link-Easy may be used to override a control setting for a fixed time period (a zone that is off via BAS scheduling may be turned on during “off” hours; or an executive office may be manually adjusted to any desired setting during daylight harvesting). In the override mode, the override signal has unlimited capability to operate the fixtures from full bright to dim for the pre-set time period.
End of override warning. At the end of the pre-set period, the output signal may be set to cycle the lights from bright to dim on 30-second intervals for five minutes as a warning prior to returning lights to the previous setting.
Pre-set override periods. All override options are accessed via “bit” switches located inside the module enclosure. The bit switch settings may be sequenced to four different pre-set periods of 30 minutes, 1 hour, 2 hours and 4 hours.
Specifications
Five year warranty
Plug and play, ballast power and control
Multiple control options maximize comfort and energy efficiency
Integrates both central and local control strategies
Selectable override: 30 minute, 1, 2 and 4 hours
Dimensions: Every Link-Easy is 1-1/2” x 2-1/2” x 4-1/4”
Voltage: 0-10 Volt DC
Touch Control Dimmer
Low-Voltage Parallel Dimming Control
Use the Easylite Touch Control Dimmer and enjoy the flexibility of fingertip light level control for your Easylite dimming ballasts using multiple, parallel-wired switches. Compatible with all components in the Easylite ILS, the Touch Control Dimmer is a parallel-wired dimmer capable of independent or integrated control of up to 100 ballasts.
You plug a Touch Control Dimmer into an Easylite ILS using low voltage, pre-terminated cable. Now you have light level adjustment control—from 10% to 100% of full light output, and low voltage on/off control for any lighting circuit—right at your fingertips. The patented Easylite ballast uses our low voltage control loop to power parallel dimmers, and all other Easylite ILS peripheral controls: this eliminates the need to run costly AC switch legs in new construction. Plug in up to ten independent dimmer switches per room, it’s easy.
Advantages
Ballast Powered—No AC required. Connect dimmer switches to integrated controls or ballasts without conduit, run preterminated low voltage cable directly from the plenum space to the switch.
Easily Scalable. Enjoy up to 10 independent points of control per room. All switches are connected using low voltage preterminated cable. T-tap, star tap, or daisy chain, you choose the most economical wiring configuration. Only one master switch is required.
Plug in the switch, now you’re in control. Connect a dimmer using low voltage cable, and enjoy light level adjustment from 10% to 100% light output and one-touch on/off convenience. One dimmer switch gives you independent control of up to 100 ballasts, and when integrated with the Easylite ILS, it provides user selectable override.
Maximize comfort and efficiency. With Easylite ILS the lowest input always wins. When you select a dimmer setting lower than inputs from a building automation system or a daylight harvester, the dimmer setting will remain at this lower level, providing user selected comfort and maximum energy efficiency.
Specifications
Five-Year Warranty
Plug and Play, ballast power and control
NEC Class II low-voltage control
Variable light level control for 10% to 100% and on/off control
Parallel wiring allows up to 10 independent dimmers per Zone
“Decora” Pattern available in all standard colors
Dimensions: Fits in any standard wall box. Can be mounted using drywall gang ring.
Voltage: 0-10 Volts DC
Power Switch Relay (PSR)
Low-Voltage Relay for On/Off Control
Easylite’s Power Switch Relay (PSR) module allows for low-voltage ILS control of any 20 Amp AC circuit. With the PSR, you can provide on/off control of non-Easylite fluorescent or incandescent lighting circuits using software, or any Easylite local control device.
Advantages
Schedule non-dimming components of your lighting system. The Power Switch Relay uses the Easylite ILS Plug and Play low voltage wiring system to schedule non-dimming components of your building’s lighting system.
20 Amp capacity. One Easylite PSR can turn off any devices within its 20 Amp capacity using software, or an Easylite local control device.
Flexible control. The Easylite PSR lets you control a few fixtures, a circuit, or a bank or circuits, from your computer, on schedule, or in real time using manual override.
Specifications
Five-Year Warranty
Plug and Play ballast power and control
On/off control of fluorescent or incandescent lighting circuits
Compatible with Easylite’s Plug and Play low-voltage wiring
20 Amp AC relay capacity
Dimensions: 4 -1/8” x 4-1/8” x 3/4”
Voltage: 0-10 Volt DC control of 120/277 AC
EasyTalk
Software-based Lighting Control System
EasyTalk is a stand-alone lighting energy management system embedded in a dedicated computer. EasyTalk has a unique IP address, so all EasyTalk lighting system controls can be accessed using an Ethernet network, the World Wide Web, or a separate computer.
EasyTalk’s graphic user interface (GUI) screen shows the status of an unlimited number of independent lighting zones. With EasyTalk you can set schedules for any time period 24/7, visually verify zone dimming levels, set zone kW demand levels, and see real-time building peak kW usage. Easy-Talk also features an instant override of any individual zone, or a global override of all zones, all using the GUI.
Advantages
Addressable digital/analog Zone-Controllers. EasyTalk allows control of all Easylite zones in your facility via Zone-Controller interface and Easylite’s low voltage control loop.
Control an un-limited number of programmable zones, real time 24/7. Using our low voltage control loop, EasyTalk controls light levels in any Easylite zones connected to it (0% to 100% of the light output), schedules the lights, and sets light levels by zone and time-of-day.
Use any Internet connected computer to monitor, adjust and control your lighting system. EasyTalk’s intuitive Graphic User Interface (GUI) makes learning how to use the system a snap. Use EasyTalk to assign and control lighting zones (by zone, by use, by floor, by tenant), create pre-set programs or enact real-time overrides. EasyTalk expands to include more integrated features: use of interactive architectural lighting plans, storage of installation/operation manuals and specifications, and user designed control features.
Set your limits: tell your lighting to use less power. With EasyTalk you can set a maximum allowable power use limit for your entire lighting system, or set power use limits by zone or by fixture.
Reduce your peak demand, and lower your electric bill. EasyTalk can be a stand alone front end lighting control system, or it can interface with today’s popular Building Automation Systems, allowing you to monitor your facility’s lighting system energy use in real time, so if you risk raising your peak demand, you can shed lighting system loads.
Specifications
One-Year Warranty
Open control platform, allows user customization
Light level correction and Time-of-day scheduling by zone
Scheduling kW demand reduction by zone
Setting of building demand kW target with automatic dimming
Response by zone schedule.
Real-time indication of building total kW demand (optional)
Web Browser: Microsoft Internet Explorer version 6 or newer
Java: EasyTalk requires Java to display some of its web pages
Ports: Network HTTP port 80 and Modbus port 502
IP Addresses: Static IP address on an Ethernet network
Easylite Occupancy Sensors
Occupancy Sensors
(Built exclusively for Easylite by Sensor Switch)
Easylite’s line of Passive Infrared, ballast-powered occupancy sensors are made for use in Office Buildings, Warehouses, Health Care and Educational Institutions.
Advantages
A sensor for every application. For large rooms and Warehouse applications, Easylite’s ceiling and fixture mounted high bay sensors work perfectly. And for lower ceiling heights Easylite offers fixture or ceiling mounted sensors with standard, and extended range detection.
Run on ballast power, no relays or line voltage needed. All of Easylite’s occupancy sensors run on low voltage, ballast provided power. Control of the fixtures in the sensor area is delivered directly from the sensor(s) to the Easylite ILS control loop with no relays or line voltage interface required.
Benefit from Easylite’s Warehouse On Demand Strategy. When your warehouse is in full swing, we program lights to operate at any specified light level (from 100% to 10%). When an area is occupied, the programmed light level is in effect: when unoccupied, the lights go to full dim (25% power). By controlling to full dim instead of shutting lamps off, you increase lamp life, building security, and employee safety.
When you use Easylite’s Warehouse On Demand strategy to schedule low use areas “off” during operating hours, sensors will light a path for any occupant, keeping unnecessary fixtures off, and only lighting the occupied area. When your sensors light a path, and not an entire zone, you maximize your facility’s energy efficiency.
Push-Button Programmable. Program high and low light levels based on occupancy, energy efficiency, or desired light level at task plane surfaces.
Adjustable time delay (30 seconds to 30 minutes)
Enable Warehouse On Demand function
Adding sensors is simple. Plug your Easylite sensor into an Easylite ballast using our plenum rated, pre-terminated cable, then mount the sensor on a fixture, or on the ceiling. It’s that simple.
Models
Popular Warehouse and Office Models- CM-6-WF-EL – High mount ceiling applications (15 – 45 feet off the ground) like warehouses and gymnasiums, this sensor offers 360 degree coverage of a floor area with a radius of 15 to 20 feet.
- CMB-50-WF-EL – Aisle sensor, High mount ceiling applications (30 – 45 feet off the ground), bidirectional 70-100 feet.
- CMPDT-OF-EL – Ceiling mount polyphonic microphone plus passive infrared: uses sound as well as infrared to sense occupancy.
- CM-10-OF-EL – Extended range sensor for lower ceilings, perfect for hallways or corridors.
- CM-9-OF-EL – Standard range passive Infrared sensor for lower ceilings, made for use in offices or conference rooms.
Specifications
5 Year Warranty
Plug and Play, ballast power and control
Variable light level control fro 10% to 100% and on/off control
Parallel wiring allows up to 25 sensors per Zone
UL, CUL, and Title 24 Compliant
Green LED indicator
Voltage: 0-10 Volts DC
Emergency Module
Emergency Module
For facilities with an emergency generator, detects loss of standard building power, makes dedicated fixtures default to 100% bright.
Advantages
With an emergency fixture module installed between the Easylite ILS control loop and the Easylite ballast, your Easylite ILS detects the loss of standard building power, and causes the connected fixture to default to full bright output regardless of control input.
This module plugs into the Easylite control cabling connection between the control cable and the ballast, eliminating any line voltage wiring or relays.
Specifications
Five-Year Warranty
Plug and Play, Ballast power and control
300V insulation
24 AWG four-wire cable and
18 AWG stranded wire
Plenum Rated
Factory terminated with RJ-11 connector
Dimensions
3’ cable length
Voltage
0-10 Volt DC
Zone Controller
Addressable Zoning Module
The Zone Controller zoning module allows you to simultaneously control your lighting system locally using Easylite controls, and remotely using a PC. Create individual, addressable zones of lighting and independently control each zone’s usage parameters. Separate areas of your facility can enjoy different light levels, independent schedules for centralized time-clock control, and unique strategies for “Peak Demand Load Shedding”. For improved user comfort and maximum lighting efficiency the Zone Controller combines personal local control with centralized building management.
Advantages
Easy to scale. The Zone Controller system is configured by using low voltage wiring to “daisy chain” up to 64 Zone Controller modules throughout a facility. Low voltage wiring eliminates the need to install a separate home run from each zone back to a central computer. Link central computers together and you enjoy unlimited scalability.
Four independent zones per Zone Controller. Each Zone Controller offers centralized control for up to four independently addressable lighting zones. Each of these four zones has a unique address and can be independently controlled for light level by time of day operation.
Low voltage control signal. Zone Controller modules receive the digital control signal generated by the EasyTalk control system, interpret any changes requested for its zones, and then translate that command into a low- voltage analog control signal for the appropriate lighting zone.
Interface with your peak KW demand meter. A facility’s peak kW demand meter may be connected to the Zone Controller loop, allowing scheduled proportional reduction in zone light levels to maintain the building at a pre-set peak demand billing level.
Specifications
One-Year Warranty
Centralized lighting control
Integrates both central and local control strategies
Up to 500 Easylite control devices per lighting zone
Controls up to four lighting zones per Zone Controller, 64 Zone Controllers and 256 digitally addressable zones per system. (unlimited scalability potential)
All zones accept separate, independent control strategies
Integrates with local Easylite analog control devices
Low-voltage daisy chain wiring reduces installation cost
Multiple control options maximize comfort and energy efficiency
Dimensions: 4-1/8” X 4-1/8” X 2-1/4”
Voltage: 0-10 Volt DC analog output
Low Voltage Cable
Easylite Low-Voltage Control Wiring System
Easylite’s ILS (Integrated Lighting System) uses Easylite’s Plug and Play low voltage cables to replace line voltage wiring and eliminate the need for circuiting of lighting zones at the power panel. With an Easylite ILS, you configure controlled lighting zones using low voltage cable, so the layout of your line voltage circuits doesn’t matter. Because Easylite ILS controls are independent of your line voltage circuits, Easylite gives you more flexibility when designing branch wiring, letting you load circuit breakers to capacity, which helps achieve maximum efficiency. Fewer circuits, less conduit, and less installation labor means a lower installed system cost.
Advantages
Factory terminated and pretested. All Easylite low voltage cable is factory terminated and tested to ensure correct polarization and compatibility with all Easylite system components. Eliminates installer termination errors.
Plenum rated. Allows simple above ceiling field installation with direct runs between fixtures and controls: no need for conduit, junction boxes, or switch wall boxes.
Specifications
Five-Year Warranty
300V insulation
24 AWG four-wire cable
Plenum Rated
Class 2 CMP cable, NEC listed for installation with line voltage circuit wiring
Factory terminated with RJ-11 connectors
Available in 3’, 6’, 10’, 14’, 25’, 50’, and 100’ lengths (other lengths made to order)
T5-HO Parallel Dimming Ballast - 54Watt
Low Profile for T5-HO, One to Four Lamp
The foundation of any Easylite Integrated Lighting System (ILS), Easylite dimming ballasts adjust light levels using low-voltage controlled frequency modulation. Ballasts connect to the rest of the Easylite ILS with class 2 plenum rated wiring, using RJ-11 terminations for quick and easy installation.
With Easylite T5-HO dimming ballasts you have the power to create a customized lighting environment that enhances employee productivity, reduces maintenance costs and integrates with any DEMAND RESPONSE protocol.
Advantages
Low-voltage ballast power supply. The Easylite ballast supplies a constant 17 Volt DC along our low-voltage control line. This separate power supply drives all the peripheral controls in our system, and it allows the configuring of control zones of unlimited size.
Parallel Wired. Separate transformers for each lamp mean good lamps stay lit when others are burned out. Program Start: Our proprietary lamp ignition sequence and operating characteristics increase lamp life.
100% to 15% dimming range, with low voltage shutoff. T5-HO Easylite ballasts provide a continuous dimming range of 100% to 15% of normal light output and can also shut off power to the lamps via the low voltage control, eliminating costly line voltage relays and connections.
Run cool. Easylite ballasts are the coolest operating and most efficient dimming ballasts available.
Power up to 4 lamps. The low-profile T5-HO model offers the option of one through four lamp configurations.
Specifications
Five-Year Warranty
Plug and play, ballast power and control
AC Voltage 1 & 2 lamp: 100 to 300
AC Voltage 3 & 4 lamp: 200 to 300
AC Frequency: 50-60
Power Factor (min.): .98
Ballast Factor: 1.0
Crest Factor: < 1.53
Inrush Current: 2.4 Amps
Sound Rating: Class A
Frequency of Operation: >20 KHz
THD (277V AC): <10%
Minimum Starting Temp.: 32˚ F
Line Transient Protection
ANSI C62.41 Surge Protection Standards
U.L. and U.L.C. Listed
Meets FCC part 18 Class A
FCC CFR 47 for RFI/EMI
Dimensions:
Base 4-Lamp 23” x 1.18”(h) x 1.45”(w)
Daylight Harvester
Light Level Correcting Photocell
Easylite’s Daylight Harvester is a photo-sensor/controller that sets and maintains a user-adjustable light level in a lighting control zone by sensing ambient or artificial light. The Daylight Harvester is powered by Easylite ballasts and may be inserted anywhere in the fixture chain to provide local daylight/fixture response.
Mount a Daylight Harvester in the ceiling grid or on the lower surface of an indirect fixture. Then mount the remote slimline controller in the ceiling plenum, or in the ballast channel of a fixture within 18’ of the sensor. Working with an Easylite ILS, the Daylight Harvester’s slimline controller can operate up to 100 ballasts/fixtures.
Advantages
Flashlight commissioning. Establish a desired footcandle level in the work area beneath the sensor, place a light meter on the working surface, and use a flashlight to set the Daylite Harvester at that light level.
Continuous sampling. The Daylight Harvester continuously samples the light level and adjusts control output to the fixtures, smoothly maintaining the light level set point.
Consistent light level. Easylite’s built-in control algorithm ensures a consistent minimum light level in all areas of the space (based on light contribution from natural and artificial sources).
Lock in settings, or allow overrides. Other Daylight Harvester features include: a security setting to eliminate tampering with calibration set points, and an override to bypass the Harvester and allow direct dimmer control of the fixtures.
Specifications
Five-Year Warranty
Plug and Play, ballast power and control
Factory pre-set calibration—field adjustable
Flashlight beam set-point adjustment (no ladder)
Operate up to 100 Easylite ballasts using one sensor
Double sensor configuration with blind (dark) sensor eliminates drift due to sensor deterioration
Security setting eliminates nuisance changes to settings
Manual Override: Override and dim lights below sensor setting, or set a two-hour override of Harvester control for manual control of lighting, independent of the sensor
Sensor Dimensions: Unobtrusive sensor, just 1” diameter x 3/16” thick, ceiling or fixture mounted
Controller Dimensions: Slimline controller is 9” x 1” x 1”
Voltage: 0-10 Volt DC
T8 Parallel Dimming Ballast - 32 Watt
Low Profile T8, One to Eight Lamp
The foundation of any Easylite Integrated Lighting System (ILS), Easylite dimming ballasts adjust light levels using low-voltage controlled frequency modulation. Ballasts connect to the rest of the Easylite ILS with class 2 plenum rated wiring, using RJ-11 terminations for quick and easy installation.
With Easylite T8 dimming ballasts you have the power to create a customized lighting environment that enhances employee productivity, reduces maintenance costs and integrates with any DEMAND RESPONSE protocol.
Advantages
Low-voltage ballast power supply. The Easylite ballast supplies a constant 17 Volt DC along our low-voltage control line. This separate power supply drives all the peripheral controls in our system, and it allows the configuring of control zones of unlimited size.
Parallel Wired. Separate transformers for each lamp mean good lamps stay lit when others are burned out. Program Start: Our proprietary lamp ignition sequence and operating characteristics increase lamp life.
100% to 10% dimming range, with low voltage shutoff. Easylite T8 ballasts provide a continuous dimming range of 100% to 10% of light output and can also shut off power to the lamps via the low voltage control, eliminating costly line voltage relays and connections.
Run cool. Easylite ballasts are the coolest operating and most efficient electronic frequency modulated dimming ballasts that provide low voltage power for connected peripheral controls.
Power up to 8 lamps. The low-profile T8 model can power a one through four lamp service in the “base” unit. Add an “extension module” and your Easylite ballast provides six and eight lamp capability.
Specifications
Five-Year Warranty
Plug and play, ballast power and control
AC Voltage 1 to 4 lamp: 100 to 300
AC Voltage 6 & 8 lamp: 200 to 300
AC Frequency: 50-60
Power Factor (min.): .98
Ballast Factor: .88
Crest Factor: 1.53
Inrush Current: 2.4 Amps
Sound Rating: Class A
Frequency of Operation: >20 KHz
THD (277V AC): <10%
Minimum Starting Temp: 32˚ F
Line Transient Protection
ANSI C62.41 Surge Protection Standards
U.L. and U.L.C. Listed
Meets FCC part 18 Class A
FCC CFR 47 for RFI/EMI
Dimensions:
Base 4-Lamp 23” x 1.18”(h) x 1.45”(w)
Ext. 2 & 4-Lamp 10.5” x 1.18”(h) x 1.45”(w)