Low-Voltage Parallel Dimming Control

Use the Easylite Touch Control Dimmer and enjoy the flexibility of fingertip light level control for your Easylite dimming ballasts using multiple, parallel-wired switches. Compatible with all components in the Easylite ILS, the Touch Control Dimmer is a parallel-wired dimmer capable of independent or integrated control of up to 100 ballasts. 

You plug a Touch Control Dimmer into an Easylite ILS using low voltage, pre-terminated cable. Now you have light level adjustment control—from 10% to 100% of full light output, and low voltage on/off control for any lighting circuit—right at your fingertips. The patented Easylite ballast uses our low voltage control loop to power parallel dimmers, and all other Easylite ILS peripheral controls: this eliminates the need to run costly AC switch legs in new construction. Plug in up to ten independent dimmer switches per room, it’s easy.

Advantages

Ballast Powered—No AC required. Connect dimmer switches to integrated controls or ballasts without conduit, run preterminated low voltage cable directly from the plenum space to the switch.

Easily Scalable. Enjoy up to 10 independent points of control per room. All switches are connected using low voltage preterminated cable.  T-tap, star tap, or daisy chain, you choose the most economical wiring configuration. Only one master switch is required.

Plug in the switch, now you’re in control. Connect a dimmer using low voltage cable, and enjoy light level adjustment from 10% to 100% light output and one-touch on/off convenience. One dimmer switch gives you independent control of up to 100 ballasts, and when integrated with the Easylite ILS, it provides user selectable override.

Maximize comfort and efficiency. With Easylite ILS the lowest input always wins. When you select a dimmer setting lower than inputs from a building automation system or a daylight harvester, the dimmer setting will remain at this lower level, providing user selected comfort and maximum energy efficiency.